HI All
Had a good day at Santa Pod Saturday 29/3/14 Puma ran better than expected. Took it easy to start is it had never been driven of the College site. Soon got it down to the 16-secs and terminal speed of 90-mph on the speedo, was to busy to watch the gantry, but had been running around 82-mph for the other runs.
until run number 6 where it started hesitating at the top end of 1st and into second gear. Seemed to go flat?
Does this sound like the torque limiter needs a switch fitting?
Did 2 more runs with the problem and was losing 1.5-2.0 sec on the 1/4 mile
Now for more stripping and a bit of tuning.
Is the a good remapable ECU of the puma
jim
Had a good day at Santa Pod Saturday 29/3/14 Puma ran better than expected. Took it easy to start is it had never been driven of the College site. Soon got it down to the 16-secs and terminal speed of 90-mph on the speedo, was to busy to watch the gantry, but had been running around 82-mph for the other runs.
until run number 6 where it started hesitating at the top end of 1st and into second gear. Seemed to go flat?
Does this sound like the torque limiter needs a switch fitting?
Did 2 more runs with the problem and was losing 1.5-2.0 sec on the 1/4 mile
Now for more stripping and a bit of tuning.
Is the a good remapable ECU of the puma
jim
