How to add another switch ( to the foglight)

[puma89]

Hi!
I have mounted a pair of fogg lights to my car, but cant seem to find where I can get from the front of the car too the cockpit.

I removed the extra cover ( where you can add the extra switch for fog light)

 

[warrenpenalver]

there is no wiring on the puma. you have 2 options, rip the wiring out a mk4/5 fiesta inc switch and fit to yours or make a loom from scratch to use a front fog switch from ebay etc

 

[puma89]

I allready have a complete sett with a switch/ fuse/ 2 foglights

2X

1x

cabel and fuse X1

I cant figure out the wiring stuff, do I have to make extra wholes to get from the fuses to the front of the car?

As far as I can see there are no extra space from where the wiring of the main light/headlight
goes in to the fusebox.
I was hoping there was a big whole some where.

sorry for my terrible English hope you understand what I mean.

 

[spike.]

bin the switch, and get a fiesta one, to pop into dash blank!

 

[TyeBoi]

eh i got a fiesta fog switch waiting to be used.

 

[TyeBoi]

dont forget to cut out the actual connector from the fiesta aswell so you can actually attach it properly

 

[red]

I think the question is how can they get the wire through for the fog lights from the engine bay to the dashboard!

There's a grommet behind the fuse box in the engine bay that people generally use to push wires through from the engine to the inside of the car, just remember to seal it up after you have finish to avoid getting water in your foot wells!

 

[TyeBoi]

yeh exactly. through the grommet along the glove box and up behind the stereo.

 

[puma89]

Thanks alot , I will look for that.

 

[puma89]

I found it thanks all.