ST170 Full Brake Set Up

Spare parts for cars and breaking cars here please.

Moderator: Moderators

ArtfulHussy
Project Petrol Head!
Project Petrol Head!
Posts: 1081
Joined: Wed Feb 06, 2013 2:13 pm
Model: 1.7

ST170 Full Brake Set Up

Postby ArtfulHussy » Thu Sep 28, 2017 11:47 am

Front and rear calipers and carriers, straight off the car as pictured. Can see they need a clean and a paint. All seals were brand new when they were rebuilt a few years back and were only on the road for a year or so. Car has been sitting in the garage for over two years now.
I have the means to strip these down and media blast them, if interested. I could even go so far as complete refurbishment if you wanted.
Also have used Black Diamond discs and pads. LOTS of life left in them if you're cool with second hand discs/pads. They take a good bit of heat, probably better for track use than road but I had no issues using them on my daily. I wouldn't offer them if they weren't safe to use.
I can also provide the focus front and rear hubs which will bolt straight on. All four had new bearings before fitting.
You will need to get new focus sensors as the focus hubs use different rings. The rear sensors can be spliced into the rear loom, the front plug in the same as the puma ones.


£120 for the calipers and carriers as they are
£50 to strip and blast brakes
£300 for the brakes, discs, pads and hubs with no refurbing
£500 for the lot, refurbed w/ new seals and brakes painted
Postage at cost, or you can arrange yourself and I'll happily pack as instructed. Collection from AB124RT

Image
Image
Image
Last edited by ArtfulHussy on Fri Sep 29, 2017 8:53 am, edited 3 times in total.
0 x

User avatar
Cherie
Site Moderator
Site Moderator
Posts: 3950
Joined: Wed Oct 03, 2007 8:35 pm
Model: Other
Contact:

ST170 Full Brake Set Up

Postby Cherie » Thu Sep 28, 2017 8:33 pm

I would advise using another host for your photos rather than photobucket, since their changes to block their links being used for 3rd party hosting if you don't pay for the privilege. Matt may be able to use his workaround to allow the links to work directly as they are, but that's not something I can do.
1 x

ArtfulHussy
Project Petrol Head!
Project Petrol Head!
Posts: 1081
Joined: Wed Feb 06, 2013 2:13 pm
Model: 1.7

ST170 Full Brake Set Up

Postby ArtfulHussy » Fri Sep 29, 2017 8:53 am

I think I've fixed it :D
0 x

ArtfulHussy
Project Petrol Head!
Project Petrol Head!
Posts: 1081
Joined: Wed Feb 06, 2013 2:13 pm
Model: 1.7

ST170 Full Brake Set Up

Postby ArtfulHussy » Mon Oct 02, 2017 10:29 am

Sold!
1 x


Return to “Parts & Spares”

Who is online

Users browsing this forum: No registered users and 4 guests