Bucket Seat Fitting question

Anything race related goes here, track days, rally etc Discuss everything from roll cages to regulations.
MrNoisy
Adolescent
Adolescent
Posts: 32
Joined: Mon Nov 07, 2016 1:11 pm
Model: Thunder

Bucket Seat Fitting question

Postby MrNoisy » Thu Aug 03, 2017 10:10 am

Hi all,

Now that the handling on the Puma is mostly sorted and I've serviced it, I'm moving attention to the interior.
All carpet and headlining is out, as are the back seats and rear cars / trim panels.
I've then bought a set of side mount Motordrive pro bucket seats, and am looking at fitting them, but it's not so straightforward due to the ridges in the floor pan where the front seats bolt down.

A few people have suggested you can buy Fiesta Mk3.5 rails and then bolt side mount brackets and the seatbelt clip onto these so you get the benefit of a slider and subframe without having to pay £120+ each side for the OMP subframe and slider.

Is this correct, and if so, anyone know a good breaker who does them for reasonable prices - I've seen a few on eBay but I'm not paying £100 for a pair of rails from a flaming Fiesta!

Cheers,

Giles
0 x

MrNoisy
Adolescent
Adolescent
Posts: 32
Joined: Mon Nov 07, 2016 1:11 pm
Model: Thunder

Bucket Seat Fitting question

Postby MrNoisy » Thu Aug 17, 2017 10:08 am

Anyone at all?
Spoke to a mate who does plenty of metal working and he reckoned the shape meant that the easiest option would be to fabricate a bespoke subframe that sits behind the bracing bar that goes across the middle of the car (the annoying ridge in the floor which means most seats sit so high), and then you could bolt runners and or side mounts to that, as the contours would be difficult to follow.

What have people on here done?
0 x

User avatar
trublustu
Guru!
Guru!
Posts: 1536
Joined: Sat Jan 18, 2014 5:50 pm
Model: Other
Location: Cloud Cuckoo Land

Bucket Seat Fitting question

Postby trublustu » Thu Aug 17, 2017 4:43 pm

Hello mate.
OMP and Cobra do make a subframe for the puma/Fiesta.
Though they`re really for bottom mount seats and would need adapting.

The proper way to do it is by welding two spars between the sill and the center tunnel. with caplive nuts welded to them.
Trying to use original seat rails would be weak and possibly not central (to the steering wheel)

Like these.. http://www.ebay.co.uk/itm/Universal-Wel ... Sw~y9ZN7f8
1 x
Dedicated Track Car Progress Thread
viewtopic.php?t=26160
YouTube track sessions and `incidents`
https://www.youtube.com/channel/UCC5QLi ... 4GCrMVmmlQ
Trackheads facebook group
https://www.facebook.com/groups/517158591786800/

MrNoisy
Adolescent
Adolescent
Posts: 32
Joined: Mon Nov 07, 2016 1:11 pm
Model: Thunder

Bucket Seat Fitting question

Postby MrNoisy » Mon Sep 18, 2017 2:11 pm

trublustu wrote:Source of the post Hello mate.
OMP and Cobra do make a subframe for the puma/Fiesta.
Though they`re really for bottom mount seats and would need adapting.

The proper way to do it is by welding two spars between the sill and the center tunnel. with caplive nuts welded to them.
Trying to use original seat rails would be weak and possibly not central (to the steering wheel)

Like these.. http://www.ebay.co.uk/itm/Universal-Wel ... Sw~y9ZN7f8

Thanks mate, thought I'd post up to say cheers, and I found a local guy who welded a bar with captive nuts welded and the bar went in between the sill and centre tunnel, and bolted direct to the floor on the other end with spacers.
Works well, and he also welded in a harness / strut bar in the rear which I've used to fix my mate's 4 point harnesses on - well happy!
2 x

User avatar
Brian'
Project Petrol Head!
Project Petrol Head!
Posts: 667
Joined: Tue May 07, 2013 6:24 pm
Model: 1.7
Location: Naaldwijk, The Netherlands
Contact:

Bucket Seat Fitting question

Postby Brian' » Mon Sep 18, 2017 7:26 pm

Would be great if you share a few photos of it here MrNoisy! :)
0 x
Project Smurf Blueish - viewtopic.php?f=64&t=22261"

stuvy
Adolescent
Adolescent
Posts: 126
Joined: Tue Dec 31, 2013 3:57 pm
Model: 1.7

Bucket Seat Fitting question

Postby stuvy » Mon Sep 18, 2017 7:34 pm

I always have the thought of standard equipment always needs upgrading for performance use so I'd personally weld up my own and be done with the standard flimsy stuff
0 x

MrNoisy
Adolescent
Adolescent
Posts: 32
Joined: Mon Nov 07, 2016 1:11 pm
Model: Thunder

Bucket Seat Fitting question

Postby MrNoisy » Mon Sep 18, 2017 10:02 pm

Brian' wrote:Source of the post Would be great if you share a few photos of it here MrNoisy! :)

http://i292.photobucket.com/albums/mm17 ... cplvmt.jpg
http://i292.photobucket.com/albums/mm17 ... fghuyq.jpg
http://i292.photobucket.com/albums/mm17 ... ozztgf.jpg

Sorry won't let me share them direct anymore Photobucket don't do free forum sharing!
0 x

User avatar
Brian'
Project Petrol Head!
Project Petrol Head!
Posts: 667
Joined: Tue May 07, 2013 6:24 pm
Model: 1.7
Location: Naaldwijk, The Netherlands
Contact:

Bucket Seat Fitting question

Postby Brian' » Thu Sep 21, 2017 10:32 am

Links does show pictures for me. Alternative websites that do free forum sharing are imgur of Flickr.
0 x
Project Smurf Blueish - viewtopic.php?f=64&t=22261"

MrNoisy
Adolescent
Adolescent
Posts: 32
Joined: Mon Nov 07, 2016 1:11 pm
Model: Thunder

Bucket Seat Fitting question

Postby MrNoisy » Thu Sep 21, 2017 11:20 am

Brian' wrote:Source of the post Links does show pictures for me. Alternative websites that do free forum sharing are imgur of Flickr.

Yeah, I can only post the links, but I can't post them as images on the forum anymore.
Cheers for info re imgur or Flickr, will switch over
1 x


Return to “Puma Racing”

Who is online

Users browsing this forum: No registered users and 21 guests