Recent clutch change issue

URGENT ASSISTANCE REQUIRED!

Moderator: Moderators

DOH
Project Regular
Project Regular
Posts: 355
Joined: Sat Dec 11, 2010 6:13 pm
Model: 1.7
Location: UK

Recent clutch change issue

Post by DOH » Sat Mar 24, 2018 6:38 pm

You can check it here: viewtopic.php?t=26486&start=25
Very useful information on rebuilding the Alternator , which was done in 2 stages.
Thanks Sinisa for taking the time to post and also provide a reference back to your post again today.
Regards
DOH
0 x

User avatar
Wild E. Coyote
Guru!
Guru!
Posts: 2238
Joined: Wed Apr 13, 2011 9:47 am
Model: 1.7
Location: Croatia

Recent clutch change issue

Post by Wild E. Coyote » Sat Mar 24, 2018 7:52 pm

You can check it here in real time. Puma uses a Mitsubishi alternator. https://www.youtube.com/watch?v=qOo0iSnmwP4
0 x

Coldcut
Adolescent
Adolescent
Posts: 73
Joined: Sun Jun 26, 2016 10:57 am
Model: 1.7

Recent clutch change issue

Post by Coldcut » Sun Mar 25, 2018 3:16 pm

DOH wrote:
You can check it here: viewtopic.php?t=26486&start=25
Very useful information on rebuilding the Alternator , which was done in 2 stages.
Thanks Sinisa for taking the time to post and also provide a reference back to your post again today.
Regards
DOH
Thanks DOH but the link isn't working?
0 x

Coldcut
Adolescent
Adolescent
Posts: 73
Joined: Sun Jun 26, 2016 10:57 am
Model: 1.7

Recent clutch change issue

Post by Coldcut » Sun Mar 25, 2018 3:17 pm

Wild E. Coyote wrote: Wild E. Coyote
Wild E. Coyote wrote: You can check it here in real time. Puma uses a Mitsubishi alternator. https://www.youtube.com/watch?v=qOo0iSnmwP4
Thanks Wild E. Coyote,i'll have a look at that..
0 x

User avatar
Van_Dammesque
Project Regular
Project Regular
Posts: 330
Joined: Sun Dec 11, 2011 7:54 pm
Model: 1.7

Recent clutch change issue

Post by Van_Dammesque » Mon Mar 26, 2018 10:23 pm

What size bearing was required?
0 x
Image

User avatar
Wild E. Coyote
Guru!
Guru!
Posts: 2238
Joined: Wed Apr 13, 2011 9:47 am
Model: 1.7
Location: Croatia

Recent clutch change issue

Post by Wild E. Coyote » Tue Mar 27, 2018 5:10 pm

Hi all, did find the boxes! I used PFI bearings (http://www.pfibearings.com/eCatalogue).
The big one is 17/47 mm x 115 mm (ID/OD x width). #6303-2RS C3.
The small one is 8/23 x 14 mm (ID/OD x width). #B3-23D

Hope that helps,
1 x

Coldcut
Adolescent
Adolescent
Posts: 73
Joined: Sun Jun 26, 2016 10:57 am
Model: 1.7

Recent clutch change issue

Post by Coldcut » Wed Mar 28, 2018 5:21 pm

Wild E. Coyote wrote:Hi all, did find the boxes! I used PFI bearings (http://www.pfibearings.com/eCatalogue).
The big one is 17/47 mm x 115 mm (ID/OD x width). #6303-2RS C3.
The small one is 8/23 x 14 mm (ID/OD x width). #B3-23D

Hope that helps,
Much appreciated Wild E. Coyote, i can get the bearings for it now.
Question, this was the bearings for the original
mitsubishi alternator?
0 x

User avatar
Wild E. Coyote
Guru!
Guru!
Posts: 2238
Joined: Wed Apr 13, 2011 9:47 am
Model: 1.7
Location: Croatia

Recent clutch change issue

Post by Wild E. Coyote » Wed Mar 28, 2018 10:02 pm

Yes, I went to a special store dealing with electrical stuff for cars. They just asked what type of alternator was in question, we went outside, they confirmed it was Mitsubishi and gave me these bearings based on catalogue data. They had PFI on stock and that was it.
I replaced them, they fit and the alternator is working nice and quiet
0 x

DOH
Project Regular
Project Regular
Posts: 355
Joined: Sat Dec 11, 2010 6:13 pm
Model: 1.7
Location: UK

Recent clutch change issue

Post by DOH » Thu Mar 29, 2018 1:42 pm

Postby Wild E. Coyote » Tue Mar 27, 2018 5:10 pm

Hi all, did find the boxes! I used PFI bearings (http://www.pfibearings.com/eCatalogue).
The big one is 17/47 mm x 115 mm (ID/OD x width). #6303-2RS C3.
The small one is 8/23 x 14 mm (ID/OD x width). #B3-23D

Hi Sinisa

Thanks for posting this information about the replacement alternator bearings.

Is there by chance a couple of typing errors, that may need amending in your post?

1) The large Bearing shows as 115m width , yet listings for the bearing with that part number are 14mm width ?
e.g.
https://www.ebay.co.uk/itm/BEARING-SIZE ... bb2964YVqg

2)The smaller bearing, Is the part number B3-23D incorrect and should instead be a B8-23D, (as that has the dimensions that you have listed)?
e.g.
https://www.ebay.co.uk/itm/B8-23D-S930P ... =item41aa8
0 x

User avatar
Wild E. Coyote
Guru!
Guru!
Posts: 2238
Joined: Wed Apr 13, 2011 9:47 am
Model: 1.7
Location: Croatia

Recent clutch change issue

Post by Wild E. Coyote » Thu Mar 29, 2018 3:56 pm

Of course, you are right. My tipos!

The correct part numbers:
#6303-2RS C3 (the bigger one)
#B8-23D (the smaller one)
0 x

DOH
Project Regular
Project Regular
Posts: 355
Joined: Sat Dec 11, 2010 6:13 pm
Model: 1.7
Location: UK

Recent clutch change issue

Post by DOH » Thu Mar 29, 2018 11:00 pm

Thanks Sinisa.
Typing isn't my strength either :grin: .
At least we all now have the correct part numbers for future reference when we need to replace the bearings in our Alternator .
1 x

Post Reply

Return to “HELP ME!”