FRP powered rolling project.

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

JonB

New member
Joined
Sep 28, 2009
Messages
478
Location
Bromley, Kent.
Time to let someone else have some fun.
Looking for £2000 for a unique Puma.
First the good stuff.
FRP powered by #0336, complete with matched LSD gearbox. Cam belt just done with water pump, new coil pack and HT leads.
New wishbones, trackrods and ends.
Replaced within the last 40k, all suspension parts with -30mm springs, uprated ARB, sitting on Calibre 2 alloys (16" with tyres to give correct circumference).
This is a 5 seater, got ST150 seats fitted, bit tight for headroom in the back and rear seat does not drop.
Rear discs fitted with working ABS, Mondeo callipers over 300mm RS discs on the front.
Exhaust is virtually straight through with sports cat back box.
Now the not so good stuff.
Arches and sills need replacing, will probably not pass MOT in March 2018 without attention, definitely failing on emissions unless manifold changed or cat fitted inline.
Will be happy to donate all spares with car, rear light clusters, alternator, aircon p/s and ABS pumps, std manifold with cat, 1.7 gearbox, driveshafts and many small parts.
Feel free to check my "Puma Plus" project thread for details of my adventure
I can be contacted either by message here or send a text to 07940 555630.
 
Can you add a location please.

Ta :eek:k:
 
Update.
Rust is worse than I thought.
Only really suitable as a donor now, 3/4 jacking points are gone!
Will take £1500 as buyer will need trailer or recovery truck.
 
Status
Not open for further replies.

Latest posts

Back
Top