alexwilliams840
New member
- Joined
- Jul 8, 2011
- Messages
- 1,744
Hello everyone, I've been on here a while now and I've had a previous Project Thread but I thought I'd start fresh. So what state is the car currently in...
- Natural Aspirated... But with 4-2-1 & full stainless. MAF & TB modded by Jacko. Air box mod that is similar to FRP but better IMO. Fuel pressure regulator with wideband to sort fuelling out
- AP Coilovers
- Fully rebuilt 300mm front brake upgrade
- 13 Row Mocal oil cooler
- Few unnecessary bits removed. Rear seats, rear speakers, rear seat belts, spare wheel & holder, heat shields replaced with reflective tape, quite a chunk cut out from the front bumper from when the large intercooler was in place
- Few interior changes including swapping to leather, white suede roof lining, anthracite pillar trim, black centre console trim
To do list...
-Re do turbo conversion. Standard compression & 7 psi. Just need a new turbo.
- Make 300mm brakes fit with standard 9 spokes
- Fit 195/45/15 tyres to 9 spokes
- Have the car be <950kg
Anyway, few pics
- Natural Aspirated... But with 4-2-1 & full stainless. MAF & TB modded by Jacko. Air box mod that is similar to FRP but better IMO. Fuel pressure regulator with wideband to sort fuelling out
- AP Coilovers
- Fully rebuilt 300mm front brake upgrade
- 13 Row Mocal oil cooler
- Few unnecessary bits removed. Rear seats, rear speakers, rear seat belts, spare wheel & holder, heat shields replaced with reflective tape, quite a chunk cut out from the front bumper from when the large intercooler was in place
- Few interior changes including swapping to leather, white suede roof lining, anthracite pillar trim, black centre console trim
To do list...
-Re do turbo conversion. Standard compression & 7 psi. Just need a new turbo.
- Make 300mm brakes fit with standard 9 spokes
- Fit 195/45/15 tyres to 9 spokes
- Have the car be <950kg
Anyway, few pics