Ford Puma ST Turbo *diy ambition*

Do you have a Puma that is a project? Do you want to track the progress with your own thread? Feel free to do it here.

Moderator: Moderators

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sat Aug 11, 2018 1:34 pm

Even more teasers!!
image.jpeg
image.jpeg
1 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
Van_Dammesque
Project Regular
Project Regular
Posts: 347
Joined: Sun Dec 11, 2011 7:54 pm
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by Van_Dammesque » Sat Aug 11, 2018 5:33 pm

Can we see a front on pic? From the side the front end looks like a good fit!
0 x
Image

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sun Aug 12, 2018 10:56 am

As requested:
IMG_0770.JPG
IMG_0768.JPG
2 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
Van_Dammesque
Project Regular
Project Regular
Posts: 347
Joined: Sun Dec 11, 2011 7:54 pm
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by Van_Dammesque » Sun Aug 12, 2018 11:04 am

Nice!
1 x
Image

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sun Aug 12, 2018 11:15 am

Van_Dammesque wrote:
Sun Aug 12, 2018 11:04 am
Nice!
The back is even nicer!!
image.jpeg
The attachment image.jpeg is no longer available
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
Van_Dammesque
Project Regular
Project Regular
Posts: 347
Joined: Sun Dec 11, 2011 7:54 pm
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by Van_Dammesque » Sun Aug 12, 2018 12:10 pm

Indeed, everything doesn't look out of place as you might imagine when told about the mod!
0 x
Image

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sun Aug 12, 2018 12:41 pm

Unfortunately some butchering of rear metal is needed to get the rear fiesta fogs to fit (using Lhd fog as well)....
IMG_0771.JPG
IMG_0772.JPG

If you use the reflectors instead then no need for such cuttings... but then what would you do with the rear fogs??
0 x
Instagram: @legends_e10
"Its all about the passion"

Nooni_nooni
Adolescent
Adolescent
Posts: 37
Joined: Mon Aug 13, 2018 6:13 am
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by Nooni_nooni » Mon Aug 13, 2018 6:30 am

Loved seeing the progress you are making with this. Just bought a 1.7 Puma with 50k mileage for £500!! And although my ambitions are a lot smaller than yours, the amount of ridiculous things you are doing with this car are giving me hope that a newbie like me with no experience can still give it a good go.
2 x

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Thu Aug 16, 2018 3:37 am

DIY electrical advise needed!!

I'm in the hopes of putting together a touch sensor system... I'm at that about to do a crude prototype / not sure what I'm doing stage..

The system must power on when either unlock signal is sent or door is opened.. with either of these signals one of two delay relay will activate sending the 12v to a converter dropping to 5v then going to sensors.. sensors will activate another set of relays that will allow 12v to power door actuators...
((Hope this makes sense :s ))
Can someone have a look at this diagram and kindly give opinion and advise on any changes please??
IMG_0781.JPG

These are parts being used so far:
IMG_0783.JPG
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
Van_Dammesque
Project Regular
Project Regular
Posts: 347
Joined: Sun Dec 11, 2011 7:54 pm
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by Van_Dammesque » Sat Aug 18, 2018 1:16 pm

https://www.ebay.co.uk/itm/Raspberry-Pi ... Sw5cNYcSC7
For the step down, or if you know the draw current you could add a simple resistor (make sure you get a resistor that can cope with the power dissipation.)

Step back up:
https://www.ebay.co.uk/itm/Mini-Micro-3 ... SwnHZYTCXh

Switches: Depends on current draw, relays for high current, transistors for low current (mA).
Also try and fuse it like the car uses.
0 x
Image

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sun Aug 19, 2018 4:41 am

Van_Dammesque wrote:
Sat Aug 18, 2018 1:16 pm
https://www.ebay.co.uk/itm/Raspberry-Pi ... Sw5cNYcSC7
For the step down, or if you know the draw current you could add a simple resistor (make sure you get a resistor that can cope with the power dissipation.)
This i got!
Van_Dammesque wrote:
Sat Aug 18, 2018 1:16 pm
Step back up:
https://www.ebay.co.uk/itm/Mini-Micro-3 ... SwnHZYTCXh
Didnt think of those. Was thinking a small 5v comm relay that can shift 12v through??
Im assuming with one of these i can do away with the relay and maybe power the actuator direct through this??


Ive aquired 10x ttp3 touch sensor pads for the switches. One issue is they do nt hold constant continual power which i why ive intergrated delay relays to theoreticaly cut power flow after short time.
The relays are omron h3y relays.
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Sun Aug 26, 2018 2:24 am

Redone parts list

EXTERIOR


Fitted:
......
Rear tint & sunstrip- £60
Monroe dampers - £70
Monroe rubber top mounts + bearing - £60
Monroe rear bump stops + dust cover - £20
Apex lowering springs - £87
Wishbone poly bushes - £30
Adjustable droplinks (with poly gaitors) - £40
Rear beam poly bushes - £25
Front Nordic wheel bearing x2 - £20
Puma Mud flaps - £5
Mk7 Fiesta front bumper with fog light holes - £40
Mk7 Fiesta ST rear bumper + diffuser - £90
LHD Mk7 Fiesta rear fog light - £10
Mk7 Fiesta asian style front grille - £30


Still to fit:
......
Rear disc conversion (hub, spindle, caliper + carrier, abs ring) - £70
Wind deflectors - £40
Mk4 Fiesta RST style bonnet vents - 25
Kunifer piping (for brake lines) - £10
Fiesta st150 brake caliper + carrier - £45
Mondeo3 brake servo + master cylinder - £15
Stainless steel overbraid brake hose - £47
StreetKa 16" wheels - £290 (whole car)
Spare streetka wheel - £30
Halo head light rings - £20
HID headlights - Free
Rear indicator clear lens - Free

** estimated total spent on exterior so far = 1250
(Incl. miscellaneous items such as filler and rust convertor)


Still to purchase:
......
Fiesta st150 grooved brake disc + pads - £150
Bee sting arial - £10
Track rod ends - £10 each
Cv joint + gaitor kit - £30 each
20mm(Ford StreetKA) rear spacer - £40
Puma logo etched Alloy door sill plates – £40
Ford Racing Puma hand brake cable - £25
ST badges - £10
Silver nylon rim protector - £50
Halo head light rings - £20
Mk7 Fiesta halo fog lights - £30
BMW 4series side vents - £15
0 x
Instagram: @legends_e10
"Its all about the passion"

dmc005
Newbie
Newbie
Posts: 2
Joined: Fri Dec 19, 2014 2:12 pm
Model: 1.7

Ford Puma ST Turbo *diy ambition*

Post by dmc005 » Thu Sep 06, 2018 11:32 am

Those are some good prices where you getting theses parts from 👍👍👍👍
0 x

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Mon Sep 10, 2018 1:57 pm

dmc005 wrote:
Thu Sep 06, 2018 11:32 am
Those are some good prices where you getting theses parts from 👍👍👍👍
Eurocarparts, eBay, gumtree, burtons, clarkins and one or two members from here (for sale section).
I do have trade account with euro n clarkins but besides that I'm always looking for the lower price deal.
Helps when you have part numbers and are not over fussed by branding.
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Mon Sep 10, 2018 2:02 pm

image.jpeg
1 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Tue Sep 11, 2018 12:09 pm

So i was looking for the clips to put back together a rear speaker pod and thought ill rip thrm off the spare pods but then realised this...
image.jpeg
4mm allen bolts all the way round .. Genuine mold. :?
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Fri Oct 05, 2018 10:47 am

These should go down very well (I hope) :-D :D :pose: :pose2:
IMG_0809.JPG
0 x
Instagram: @legends_e10
"Its all about the passion"

User avatar
PH03NIX
Adolescent
Adolescent
Posts: 76
Joined: Sat Feb 07, 2015 10:52 pm
Model: 1.7
Location: East London
Contact:

Ford Puma ST Turbo *diy ambition*

Post by PH03NIX » Fri Oct 19, 2018 3:34 am

So a bit but not a lot done.... mostly body work
I now at this point have 'wing mirror' indicators - video coming soon!
Just as of today finished cutting and fitting 'ST Line' side vents... I do likely

Pictures coming soon
1 x
Instagram: @legends_e10
"Its all about the passion"

Post Reply

Return to “ProjectPuma”