Hi! I'm having some rev-related issues with my 1.7 '98 Puma. After excluding most of the causes (TPS, ICV, Vacuum-leaks, Some dirty plugs, Cluch switch), I'm down to the PAS Pressure Sensor (sensor or plug) underneath the left front side of the car. Is there any test I can do to rule out the sensor and can someone give me the part number so I can replace it with the right if needed? Thanks a lot
PAS Sensor part
- Thread starter Gasher33
- Start date
Help Support ProjectPuma:
It is just a switch. I think it is short in default state and when you turn the steering to the outmost position, the pressure in the system opens it and that is the signal to PCM to rise revs at idle.
EDIT: Confirmed, it is short (closed) in normal state, open (disconnected) at high pressure state of the hydraulic system.
Finis for the switch is: 1010902
Hope that helps,
EDIT: Confirmed, it is short (closed) in normal state, open (disconnected) at high pressure state of the hydraulic system.
Finis for the switch is: 1010902
Hope that helps,
Similar threads
Latest posts
-
-
-
-
-
Vehicle For Sale 2001 (Y) 1.7 85k FSH bodywork mint £2990 Warwickshire
- Latest: John Woodward
-
-