Search results

Unfortunately the puma engine went 2 years ago, blew 2 in a year so took it out with the hope of replacing it with a bigger engine haha. Thanks for the reply though

Oh an basically, is there some way to bypass the crank sensor?

Hi there, talking about my autograss puma yet again! I am having my flywheel lightened and the guy who is doing the machining was asking whether the puma actually needs the notches where the crank sensor are. That's the part of the flywheel where he was going to start taking weight off but as...

This is what my puma looked like for this season's racing at the start of the year, I had a head on with the armco halfway through the season and have now stripped the car down to less than a shell with the rollcage, removed all the panels and fitted a FRP fibreglass bosykit that Kieron from...

Hi I need the hardest (and possibly taller than the standard) springs that will fit the puma suspension as possible, when I am taking the tight corners on the grassstracks, the front end nosedives a lot. at the moment my car has lowering shocks and lowering springs but there is too much...

Thankyou for all this info, I have re-routed the belt now minus the aircon and raced it Sunday and it seems to be all ok :)

Hi, the pulley for the power steering for my puma broke on Sunday when I was racing it and the fanbelt then came off. I have seen a plan with a re-route somewhere but I cannot find it on here where the power steering and aircon were bypassed with the fan belt and a smaller belt was fitted. Does...

thanks for the replies and I am sorry for my late reply. I am actually from Portsmouth but I saw a buy it now kit on ebay for £400. I will be up in Manchester in late august so was hoping that the ebay seller is on here. What I was wondering Kizza is, is there a way to get just the 2 front...

Hi, I saw on ebay several months ago a 6 piece FRP firbeglass bodykit which comprised of 2 front wings, 2 rear quarter panels and the front and rear bumpers. It was near to Manchester from what I remember. I forgot to save the seller to contact them directly but the kit was just £400 and I was...

it was the ebay one that I brought. Its under direnza puma 4-2-1 and they seem to auction one a week off too which is what I won for £100 instead of the buy it now price of £169. :grin: It links 1 & 4 and 2 & 3. Its got a more throaty sound to it now and seems to be using a little more fuel so...

The way that I understand it, is that it increases the airflow out of the engine allowing the ease of flow of air back into the engine and making it take on more fuel and then it increases the power of the engine. I have read different things about the BHP increase but most say between 5-15BHP

well it turns out mine was an older model and it only had the one lambda sensor and the car now runs very well with the 4-2-1. The fuel consumption seems to have gone up, I just hope this means more power!

Hi there, I have just brought a 4-2-1 manifold to fit to my autograss puma. The exhaust has just one plug hole for the lambda sensor at the back of the section. I think my puma has a pre cat and a post cat sensor, if that is the case then which do I put into this hole seeing as the car will now...

Same, when the back ends stepping out, the wheel is the last thing I look at. Love your spoiler. Might have to do a few aesthetic bits to mine to make it look anywhere as nice as yours, mine has been in the barrier once, both front wings are bent and the drivers door from an autograss special...

Wow looks amazing. I have the tape on the steering wheel of my puma too :D haha

Thankyou. I just assumed it was all mm. etc.

oh also when I fit the 4-2-1, do I have to do anything to the ECU or with sensors or are they not in the first bit anyway?

Did use low profiles at the beginning of the year, people running 13" wheels tend to use 65mm tyres and I was running 15" with 45mm walls and it works out as virtually the same diameter in total, but they were popping off the rims on the corners, the camber should sort that for next year as was...

so that should max out the performance then? Its been a quick little car just lacking a bit in out of the corner speed, the track is egg shape so one wide fast corner and the other feels like a hairpin to go around and its out of that corner that the puma struggles. Will get rid of the backbox...

yeah we are, looking for one on ebay. Basically the mods are unlimited just not allowed nitrous.