FRP Inlet gasket?

[raspberrycheesecake]

Cleaning the FRP inlet manifold and want to split the two pieces apart. What gasket goes between the 'tubes' and the 'box' ?

Cheers!

 

[evilrob]

Standard 1.7 inlet manifold gasket:

 

[raspberrycheesecake]

That's the gasket between the cylinder head and the manifold 'tubes'. I'm meaning the gasket between the manifold 'tubes' and the 'box' which has the Ford Racing / Puma / FRP number cast into it.

 

[Blue3]

Never taken mine apart, but my guess would be there is no gasket just silicone sealed. There is no part no listed for a gasket on the frp parts list

 

[JonB]

I used a silicone instant gasket when I put mine together, went for an up to 250 degree centigrade RTV. Seems to do the trick but I should have applied a little to the inside of the heads of the bolts to stop air leaks then I would not have had to apply more around the heads. (Had to use an incense stick to find the leaks and clear a running lean fault code).