Torx Size ~????

[alexc1983]

Anyone have any idea what size Torx socket i need to remove seats and seat belt bolts?

Thank you

 

[Patch]

45 iirc from when I did mine

 

[alexc1983]

ok great stuff cheers

 

[alexc1983]

45 iirc from when I did mine

is that the same for the rear seat belt bolts and seat brackets mate?

 

[evilrob]

You need a 10mm socket for the 5 bolts holding each seat in place iirc.

I used a T50 bit on a breaker bar to undo the seatbelt bolt; you need a lot of purchase to undo the seatbelt tensioners if they've not been undone before.

 

[alexc1983]

You need a 10mm socket for the 5 bolts holding each seat in place iirc.

I used a T50 bit on a breaker bar to undo the seatbelt bolt; you need a lot of purchase to undo the seatbelt tensioners if they've not been undone before.

Ah ok, yes ive removed the 10mm bolts, so i just need a T50 bit and some brute force to get brackets off.

cheers