VorTex's Orang-outang Focus ST Project

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VorTeX

New member
Joined
Oct 16, 2007
Messages
347
Location
Peterborough
Well here starts my story of the Orang-outang ST!

He is quite a bright one!
IMAG0254.jpg


So here are some shots after the first wash (It wasn't very dirty before, but needed to put my mark on it :-D ).

After the wash I applied one coat of JetSeal-109 and then one topcoat of Meguiars Wax.

IMAG0263.jpg


IMAG0256.jpg


IMAG0257.jpg


IMAG0258.jpg


I had a bit of a clean up of the tail pipes as they were a little black! I didn't get a before shot of both sides, but they were both the same.
Before:
IMAG0261.jpg


After:
IMAG0259.jpg

IMAG0260.jpg

IMAG0262.jpg


The right one still needs a bit of a going over, but I'm pleased with the results :thumbs:

Still contemplating a new exhaust system, but not sure if it is worth it or not!
 
Good work on the tailpipes :eek:k:
 
Spotted YUB's long lost brother at Ford Fair again:

P1020411_zps16dc248c.jpg


:eek:k:
 
Back
Top