Damp Garage...

General discussion area relating to the Ford Puma, any off topic or threads that are deemed chat/waffle will be moved to the relevant areas! Please keep ON TOPIC at all times.

Moderator: Moderators

Post Reply
the_penfool
Newbie
Newbie
Posts: 8
Joined: Thu Oct 11, 2018 11:09 am
Model: 1.7
Location: Essex

Damp Garage...

Post by the_penfool » Sun Dec 02, 2018 10:11 pm

Another noob question.
So my lovely red Puma is kept in the garage and only use it couple of times a week.

My question is from a rust prevention point of view given that the garage is a bit damp am I stupid to be keeping a Puma in there over the winter.

And is there anything you would recommend doing to make it less damp or prevent the Puma rusting.
0 x

DOH
Project Regular
Project Regular
Posts: 366
Joined: Sat Dec 11, 2010 6:13 pm
Model: 1.7
Location: UK

Damp Garage...

Post by DOH » Tue Dec 04, 2018 10:01 am

Adequate ventilation is key.
If its a concrete panelled garage, this can be a common problem.
Things that will help is ensuring that there is a through draught from the opening door to the back wall, which maybe as simple as adding a few air bricks on that wall, assuming it doesn't have a door. If it has a door, chase out a couple of inches of the floor just in front of the door frame and then a corresponding width below the door frame to the outside. This will help a lot.
Furthermore concrete floors themselves are often damp , to help with that, use an old living room carpet to cover.
This will make it a lot warmer to work on your car in all weathers.
Last edited by DOH on Tue Dec 04, 2018 6:08 pm, edited 1 time in total.
0 x

ian cox
Adolescent
Adolescent
Posts: 74
Joined: Mon Jun 05, 2017 1:53 pm
Model: Thunder
Location: Berkshire

Damp Garage...

Post by ian cox » Tue Dec 04, 2018 11:50 am

Hi
As suggested above it depends on the construction methods used to build the garage
I had a garage with concrete floor, laid straight on the earth so no damp course, with single brick skin, corrugated roof and up and over metal door.
The floor allowed moisture to rise up through it and the condense on parts of the car. Nightmare.
I sealed and painted the floor then put chipboard flooring down. It helped a lot. Painting the floor will also prevent continuous concrete dust rising up form it.

Another method is to put in a dehumidifier and or large silicon bags to dry the air out inside and outside the car.

I am lucky as my current garage is integral to the house so with a painted and carpeted floor. :grin:

Kind regards Ian
0 x

the_penfool
Newbie
Newbie
Posts: 8
Joined: Thu Oct 11, 2018 11:09 am
Model: 1.7
Location: Essex

Damp Garage...

Post by the_penfool » Wed Dec 05, 2018 4:01 pm

It's a Concrete base with single bricks and then an Asphalt type roof.
Guess I need to think about adding some ventilation and sealing/painting the floor.
0 x

redexr
Project Regular
Project Regular
Posts: 214
Joined: Thu Sep 19, 2013 5:01 pm
Model: Thunder
Location: Norfolk

Damp Garage...

Post by redexr » Sun Dec 09, 2018 2:16 pm

I have a car sitting in my large shed which allows condensation to form on the car in damp murky mild weather. My answer is a couple of cheap tall stand fans blowing air over the car for 10 minutes every hour on a timer, this has cured the problem and I only switch it on in relevant weather. I've had my XR2 in a brick garage for over 20 years now and use a dehumidifier and never had a condensation problem, catch tank is plumbed to outside so no need to empty.
0 x

Post Reply

Return to “Puma Area”