When I pulled away this morning I could hear water gushing from the passenger side when I braked. When I looked out the rear window I could see a trail of water all the way out of the estate. It was coming out of the passenger side sill right next to the tyre (behind the carpet)
Are there...
Thanks guys I'll get a syphon pump off ebay.
So after disconnecting the coil pack should I just fully turn the key to turn the engine over a few times?
Hello all, hope someone can help!
My Puma has been off the road since October 2014 and only started a couple of times last year. I am moving house in a few weeks so I'll need to move it. It was serviced just before I took it off the road and it has plenty petrol in the tank. Is there anything in...
Thanks for the reply. The garage recommended I just replace the boot as it's easiest thing to do. I'll order them ones from ebay and see how they go.
Cheers
I need to fit some new ball joint boots to pass the MOT.
Going off this post the sizes are about 16mm and 34mm diameters. http://www.projectpuma.com/viewtopic.php?f=65&t=18339" onclick="window.open(this.href);return false;
Would this boot fit ok for sure...
My Milltek exhaust hangs a bit low so I bought a polyurethane mounting rubber from pumabuild.com. The problem is the holes are much smaller and I can't get it to fit on the exhaust mount bit. I don't want to grind the end of the exhaust bit so do you think the new mount will be ok if I drill a...
It's been a very long time since I last posted, but there's been quite a bit of progress over the last few months. Firstly, back in march a neighbour reversed in to the door. He was adamant that he wanted to through his insurance instead of giving me £200 to repair (I think he felt so guilty)...
I noticed when washing the car there's little specs of rust appearing on some of the bits I resprayed. The Bilt Hamber Hydrate 80 doesn't seem to have done a very good job. I'll probably wait till the better weather next year to have another go, and use a different rust inhibitor.