Search results

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    engine temp going high, urgent

    very helpful, i know its one of the components in the cooling system that could be faulty. Its not the hcv as the heater is working fine. Its not the thermostat as this fault only occurs intermittently. If it was the rad it would do it all the time. I doubt its the water pump as again it would...
  2. A

    engine temp going high, urgent

    gotta ford puma 1.6, after about 15 minutes of driving at approx 50-70mph the temp gauge climbs towards the red fairly quickly and the cooling fan comes on. Turning the heater controls to full heat and putting the blower on brings the temp gauge back down. this only happens when at speed, it...
  3. A

    bondee sump removal help

    Tried removing the sump on a 1.6 zetec-se which has been bonded on, and having difficulty removing it. The Haynes manual said that bonded sumps are more difficult to remove and ford use a special tool. Can't find anything about the tool on google. Help please, much appreciated
  4. A

    boot interior light not working

    so my best bet is to check the connector that goes onto the tailgate latch / lock.
  5. A

    boot interior light not working

    the interior light in my boot is no longer working. i have replaced the bulb. i did a quick voltage check along both lines to a earth and got no voltage. i tried to bypass the earth and that did not work either. i looked in the handbook and there is not a fuse listed to the boot interior light...
  6. A

    head unit no longer beeps after fitting amp

    i got beep turned on. must be something to do with now having an external amp wired in. thanks for your help
  7. A

    head unit no longer beeps after fitting amp

    cheers thanks. what about when the ignition is switched on and i press one fo the buttons on the headunit, it used to beep. is that function controled via the internal amp too?
  8. A

    head unit no longer beeps after fitting amp

    i have a sony head unit in my car, and whenever you press a button such as source it makes a beep noise. also when you turn the car off and remove the key the head unit made 3 beeps. i recently fitting an amp powering all four speakers. since i fited the amp, the headunit no longer beeps when a...
  9. A

    Essex Meet - 25th June 2011

    havent reall done anything like this before, but im defo up for it. will jsut need finalised info
  10. A

    change in ride after lowering?

    i know the handling will feel stiffer and more responsive with less body roll after lowering the car. i was just wondering, what difference is felt with normal driving ride quality when you do: a) just lowering springs b) lowering springs and performance shocks ?
  11. A

    front door speakers needed urgent

    i need some new front door speakers in my puma. ideally i wanna fit the 15cm speakers so that its a straight fit in the exisiting hole. i will buy 13cm speakers if required. ive gotta amplifier (4 channel), which i have not fitted yet, which puts out 70watts rms per channel. advice on speakers...
  12. A

    will these fit?

    will these fit in the front doors http://www.dvbcaraudio.co.uk/audio-mtxt6c603-68243-3way-coaxial-speaker-p-10016.html" onclick="window.open(this.href);return false;
  13. A

    where to mount amp other than boot?

    does it not get hot there?
  14. A

    where to mount amp other than boot?

    wanna buy and amp and wondering about install locations other than the boot. any1 reccomend anything?
  15. A

    ford oem amp fitting?

    how easy would it be to install / retrofit?
  16. A

    ford oem amp fitting?

    i wanna buy the ford eom amplifier for my puma. but im unsure as to how to fit it. bassically will i need to buy a wiring loom for it from fords or summin. i dont really wanna buy it and find out its more hassle to fit than a aftermarket amp
  17. A

    rear bench removal help

    i need to remove the rear bench on me puma. i have unclipped it from the sides and but when i lift it up, it feels like it is locked in somehow at the back in the middle. is there a third fixing for the rear bench other than the two clips on the sides?
  18. A

    another newbie

    cheers for the welcome people. loving the puma. it had its MOT today and im pleased to say it passed, no advisories and the mechanic even said he thought it was a great little car. any1 on here from around essex / hertfordshire way? like harlow, bishops stortford, hatfield etc
  19. A

    intermitant temp fault

    first off my engine fan kicks in alot. its never garanteed when it is going to kick in. it may not kick in during a good trashing but will kick in on my slow drive to work in the mornings, and vice versa. also, sometimes my engine temp gauge starts to climb towards the red zone. it can do this...
  20. A

    another newbie

    hi new to project puma. have been a member of the zsoc.com forum since i had my 1.25 fezzy. upgraded to a puma 1.6 back around september time loving the car loads
Back
Top