1997 Puma projeckt , with Audi's 1.8t quattro soul

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Right hand inner fender ready. 1.5 al and attached with body glue and a few screws and pop rivets
 

Attachments

  • F2E124D2-882C-4ABC-9FB1-E009A27E63E3.jpeg
    F2E124D2-882C-4ABC-9FB1-E009A27E63E3.jpeg
    1.2 MB
This is epic. You wouldn't happen to be connected to Toyota Gazoo Racing Rally team, somehow? I mean, the ammount of modifications is just on next level!👏👏👏👏👏

PS: What widebody parts are you using and where did you source them, please?
 
I have not been in contact with Gazoo racing Team 😅
For the blue Puma, I got this wide set from the Estonian Rallycross team Reinsalu. It is about one inch wider than the s1600.


Link Reinsalu Puma parts Ford Puma body panels - Reinsalu Sport
Below is a picture of the reinsalu body series Rallycross
 

Attachments

  • IMG_1384.jpeg
    IMG_1384.jpeg
    582.2 KB
Last edited:
  • Like
Reactions: red
4A0A2340-11B3-40AE-A6A8-CD01BF76BF14.jpeg
I painted the bottom with epoxy, hopefully that will keep the rust away for a couple of years.
 

Attachments

  • 0FFD8041-D8BD-4D19-A56B-A828E2633F31.jpeg
    0FFD8041-D8BD-4D19-A56B-A828E2633F31.jpeg
    1.2 MB
  • Like
Reactions: red
More painting. Now from blue to bottom.
 

Attachments

  • 8A512668-9542-48D3-AC22-61E0D9AB3E66.jpeg
    8A512668-9542-48D3-AC22-61E0D9AB3E66.jpeg
    1.3 MB
  • IMG_7107.jpeg
    IMG_7107.jpeg
    1.6 MB
I got the interior parts painted now.
 

Attachments

  • 9CE6DFFD-8535-412C-8D9F-DC01B4D7BD31.jpeg
    9CE6DFFD-8535-412C-8D9F-DC01B4D7BD31.jpeg
    1.4 MB
  • C8E51B8D-142F-4DC6-A399-FB1AE479BCD9.jpeg
    C8E51B8D-142F-4DC6-A399-FB1AE479BCD9.jpeg
    1 MB
I need help, could someone tell me what the front and rear brake outputs are on my abs pump?
 

Attachments

  • 2ee06405-9ca6-46be-8552-5b9901521f12.jpeg
    2ee06405-9ca6-46be-8552-5b9901521f12.jpeg
    8.2 KB
C77F4189-FF65-4D4F-9688-6CB8CB0BC5DA.jpeg
The engine and axles are in place and I can connect the electricity soon. It will be a bit of a challenge for me, but I believe I can do it.
 

Latest posts

Back
Top