zinc2000
Active member
Ok guys and girls, thinking heads on please
Coming back from MOT last year managed to pick up a nut along the road (as in nut/bolt not lunatic) which wedged itself between the front ABS sensor ring and the hub.
By the time I got home the ABS light had come on so figured the nut had heated up the ring and blown the sensor.
Replaced front sensor today....no difference, then discovered the other front sensor wire had come loose and had been rubbing on the rear of the front wheel.
Cut and joined the damaged wires from the sensor...no difference
So, does rejoining the wires simply not work? do I now need to replace that sensor as well?
Both sensors were new last year for the MOT.
all fuses fine, no codes come up on my reader yet ABS/Traction lights still on
Ideas please
Coming back from MOT last year managed to pick up a nut along the road (as in nut/bolt not lunatic) which wedged itself between the front ABS sensor ring and the hub.
By the time I got home the ABS light had come on so figured the nut had heated up the ring and blown the sensor.
Replaced front sensor today....no difference, then discovered the other front sensor wire had come loose and had been rubbing on the rear of the front wheel.
Cut and joined the damaged wires from the sensor...no difference
So, does rejoining the wires simply not work? do I now need to replace that sensor as well?
Both sensors were new last year for the MOT.
all fuses fine, no codes come up on my reader yet ABS/Traction lights still on
Ideas please