evilrob
Active member
- Joined
- Sep 14, 2009
- Messages
- 4,925
TLDR version:
Ex-Pressed Steel Panels can make any Puma body panel we want - so what do you want? Tell them here:
https://www.surveymonkey.co.uk/r/CC3P5XQ
Full story:
You may or may not be aware that I, with the assistance of ArtfulHussy on here, handed over the last known set of original unpainted complete Ford Puma sills to a company called Ex-Pressed Steel Panels Ltd who specialise in reproducing out of stock Ford body panels, for the purposes of putting them back into production. (Click for their Facebook page).
It's taken a while but they're now in production - £125 plus VAT per side; considerably cheaper than they were from Ford originally. Orders placed now will be ready in approximately 90 days due to demand and because each sill is made to order. They are absolute works of art as I'm sure the first happy customer XAF will agree. Additional pics courtesy of Blue3.
Cheaper patch panels (aka "Repair Sills) that cover the area just under the scuff plates (the most common place for the sills to rust) are also available - you can get your hands on these immediately as they have these in stock due to being considerably easier to manufacture. Just £52.50 + VAT for these.
HOWEVER! They have now sourced original unpainted body panels for both Standard Pumas AND Racing Pumas - ALL FOUR CORNERS FOR BOTH!
It takes a lot of time and effort, multiple test runs and R&D to replicate these panels, so they've asked me to ask you what you want them to make next. Do you want complete standard replica panels, just patch panels for the rear quarters, or would you consider putting a full Racing Puma body kit on if the price was right?
Let me know here, and we'll make it happen:
https://www.surveymonkey.co.uk/r/CC3P5XQ
Ex-Pressed Steel Panels can make any Puma body panel we want - so what do you want? Tell them here:
https://www.surveymonkey.co.uk/r/CC3P5XQ
Full story:
You may or may not be aware that I, with the assistance of ArtfulHussy on here, handed over the last known set of original unpainted complete Ford Puma sills to a company called Ex-Pressed Steel Panels Ltd who specialise in reproducing out of stock Ford body panels, for the purposes of putting them back into production. (Click for their Facebook page).
It's taken a while but they're now in production - £125 plus VAT per side; considerably cheaper than they were from Ford originally. Orders placed now will be ready in approximately 90 days due to demand and because each sill is made to order. They are absolute works of art as I'm sure the first happy customer XAF will agree. Additional pics courtesy of Blue3.
Cheaper patch panels (aka "Repair Sills) that cover the area just under the scuff plates (the most common place for the sills to rust) are also available - you can get your hands on these immediately as they have these in stock due to being considerably easier to manufacture. Just £52.50 + VAT for these.
HOWEVER! They have now sourced original unpainted body panels for both Standard Pumas AND Racing Pumas - ALL FOUR CORNERS FOR BOTH!
It takes a lot of time and effort, multiple test runs and R&D to replicate these panels, so they've asked me to ask you what you want them to make next. Do you want complete standard replica panels, just patch panels for the rear quarters, or would you consider putting a full Racing Puma body kit on if the price was right?
Let me know here, and we'll make it happen:
https://www.surveymonkey.co.uk/r/CC3P5XQ