chris_edeson
New member
- Joined
- Jan 30, 2017
- Messages
- 10
R672 EGX - Melina Blue
Failed mot today - could be saved if you are good with the spanner and/or welder.
Engine runs sweet as - on 98k and had belt changed around 80k. full leather and good ford multi spoke alloys with 5-6mm tyres. brakes are all fine (discs and pads)
I bought it in January as a runner and did over 10,000 miles in it since then. The clutch has started to slip so that would need to be changed if you did keep it.
If you want it for the wheels, engine and interior equally good.
£200 or nearest offer. located in Enstone OX7 near chipping norton.
Reason(s) for failure
Nearside Outer Seat belt anchorage prescribed area is excessively corroded & under cill corroded (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded cill by axle mount (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded axle mount correded (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Front constant velocity joint gaiter missing (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Headlamp has a product on the lens so that the light output is severely reduced lense (1.7.5a)
Front Brakes imbalanced across an axle (3.7.B.5b)
Thanks
Chris
Failed mot today - could be saved if you are good with the spanner and/or welder.
Engine runs sweet as - on 98k and had belt changed around 80k. full leather and good ford multi spoke alloys with 5-6mm tyres. brakes are all fine (discs and pads)
I bought it in January as a runner and did over 10,000 miles in it since then. The clutch has started to slip so that would need to be changed if you did keep it.
If you want it for the wheels, engine and interior equally good.
£200 or nearest offer. located in Enstone OX7 near chipping norton.
Reason(s) for failure
Nearside Outer Seat belt anchorage prescribed area is excessively corroded & under cill corroded (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded cill by axle mount (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded axle mount correded (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Front constant velocity joint gaiter missing (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Headlamp has a product on the lens so that the light output is severely reduced lense (1.7.5a)
Front Brakes imbalanced across an axle (3.7.B.5b)
Thanks
Chris