Started the engine change on the Puma this week and have a few differences with the wiring in the car. Car is a later model and the engine and loom are from an earlier car so having to swap it all over.
Problem one;
What do I do with this, there wasn't one on the loom I've removed so I've nothing to plug it into. This is behind the dash on the passenger side.
Problem two;
The heating connection, replacement loom only has six pins in the plug and the connector in the car has eight. I can cut the six pin plug off and solder the eight pin one on but I'm left with 2 wires missing. Could the extra two wires be something to do with the aircon? It seems as if the replacement wiring loom I have didn't come from a car with aircon.
Problem one;
What do I do with this, there wasn't one on the loom I've removed so I've nothing to plug it into. This is behind the dash on the passenger side.
Problem two;
The heating connection, replacement loom only has six pins in the plug and the connector in the car has eight. I can cut the six pin plug off and solder the eight pin one on but I'm left with 2 wires missing. Could the extra two wires be something to do with the aircon? It seems as if the replacement wiring loom I have didn't come from a car with aircon.